Description
| Specifications of 2D | |
|---|---|
| Detection Range | 0 – 4000mm |
| Working conditions | -20℃-65℃, 100,000LUX |
| Number of diodes | 40 pairs |
| Scanning beams | 194 beams |
| Tolerance | Up/down: ±15mm,Back/forth: ±3mm,angle ±5degrees |
| Response time | ≤100ms |
| Signal Output | Relay Output |
| Yellow LED in RX | Power Indicator |
| Red LED in RX | ON:Blocked or faulty/OFF:Normal |
| Working Voltage | 85~265VAC or 15~30VDC (Set by Dip Switch) |
| Specifications of 3D | |
|---|---|
| Installation Height | 1900mm-2200mm |
| Frequency | 25.125GHz |
| Minimum Detecting Range (from Elevator Door Hall) | 200-500mm |
| Maximum Detecting Door Opening Width | Central opening: 1750mm, Side opening: 1200mm |
| Tolerance | Up/down: ±15mm,Back/forth: ±3mm,angle ±5degrees |
| Working Condition | -20℃-65℃, 100,000LUX |
| Minimum Detecting Speed | 20cm/s |
| Detecting Mode | Moving Objects |
